Classic Frame

Rating:
80% of 100
$174.29
SKU
classic-frame-usa

Maximum 200 characters

The Classic Heavy Duty Vinyl Frame will definitely turn some heads. Made with 4"x4" vinyl posts and a 2' x 3 1/2" horizontal rail that your sign will hang from. The spacing between the posts is adjustable to accommodate signs ranging from 36" to 48" wide. 

This package comes with 2 posts, 1 horizontal rail, 4 safety pin clips and eye bolts, 2 wire retainers, post and rail caps, and 2 heavy duty steel stakes. The holes to attach a sign are 24" apart.

Simple installation To Install assemble the frame by inserting the horizontal rail through both posts and then fastening the rail to the posts with the wire retainers. Pound the stakes into the ground to a sufficient depth making sure they are level and spaced correctly, a small sledge hammer is ideal for this (***CAUTION be sure to have all underground utilities marked prior to installing the stakes***). Slide the frame over the stakes and attach your sign to the horizontal arm with the sign clips. Attach the post and arm caps. 

Made from new PVC...won't rot, fade or warp. Easy to install.

Holes to attach signs are spaced 24" apart and centered on the arm.  If you need custom hole spacing please leave a note below.

Swing Restraint Fasteners are used to attach the side of your sign to the vertical post to prevent it from swinging in the wind.  A hole is added to the vertical post 19" (inches) down from the bottom of the arm, this hole is to align with a corresponding grommet on the side of your sign down 17" from the top of the sign.  If you have different requirements please leave a note below.

Please note that customization may add a couple days to order processing.

NON STOCK - Please allow a few days for fabrication.

The new Classic Heavy Duty Vinyl Frame will definitely turn some heads. Made with 4"x4" vinyl posts and a 2' x 3 1/2" horizontal rail that your sign will hang from. The spacing between the posts is adjustable to accommodate signs ranging from 36" to 48" wide. 

This package comes with 2 posts, 1 horizontal rail, 2 sign clips, 2 wire retainers, post and rail caps, and 2 heavy duty steel stakes. The holes to attach a sign are 24" apart.

Simple installation To Install assemble the frame by inserting the horizontal rail through both posts and then fastening the rail to the posts with the wire retainers. Pound the stakes into the ground to a sufficient depth making sure they are level and spaced correctly, a small sledge hammer is ideal for this (***CAUTION be sure to have all underground utilities marked prior to installing the stakes***). Slide the frame over the stakes and attach your sign to the horizontal arm with the sign clips. Attach the post and arm caps. 

Made from new PVC...won't rot, fade or warp. Easy to install.

Holes to attach signs are spaced 24" apart and centered on the arm.  If you need custom hole spacing please leave a note below.

Write Your Own Review
You're reviewing:Classic Frame
Your Rating